A daily mud report records the condition of the drilling fluid, the operations that affected it, the materials used and the movement of fluid volumes during a defined reporting period. Its value comes from reading those records together. A density result without a sample location, or a product-consumption figure without an explanation, leaves the supervisor guessing about what actually happened.
This guide explains how to read a daily mud report, identify missing context and write useful engineering comments. It also includes an original editable daily mud report template for Excel with a blank report and a worked stock-reconciliation example. The template provides a reporting structure. Enter the applicable well-program requirements and test methods for your operation.
What does a daily mud report tell you?
The daily mud report connects fluid measurements with the work being done on the rig. The reader should be able to identify which fluid was tested, whether its properties are changing, what treatments were made and what the next shift needs to check. The ChevronTexaco and BP Drilling Fluid Manual groups the interpretation around fluid properties, rig operations, engineering comments, daily product usage and fluid-volume accounting. It stresses that isolated entries do not explain overall fluid performance.[1]
A useful report therefore answers five practical questions: What was measured? Under what conditions? What changed during the reporting period? What action was taken? What evidence is still needed? An attractive form cannot compensate for an unclear sample identity or a missing explanation of material use.

Daily mud report sections and the questions to ask
| Section | Information to record | Question for the reader |
|---|---|---|
| Identification and reporting period | Well, rig, date, start and end time, responsible engineer and fluid system | Which operation and time window does this report describe? |
| Sample context | Sample point, sampling time, depth, operation and relevant temperatures | Can this result be compared with the earlier sample? |
| Fluid properties | Applicable measurements, units, test conditions and program requirements | Which results changed, and which require an explanation? |
| Operations and treatments | Drilling activity, equipment changes, additions and treatment timing | What happened between the two sets of measurements? |
| Volumes and products | Fluid movements, stock receipts, issues, transfers and physical counts | Do the recorded movements explain the balances? |
| Engineering comments and handover | Interpretation, completed actions, unresolved questions and follow-up | What does the next reader need to understand or verify? |
The table is an original organizing framework rather than a reproduction of a contractor form. Keep any additional fields required by the operator. Where a field does not apply to the fluid system or test, identify it as not applicable instead of entering a misleading zero.
Start with the sample before interpreting the numbers
Before comparing two columns of a daily mud report, check that the samples represent a comparable part of the system. A sample from one point can differ from a sample collected elsewhere. A change in sample point can therefore look like a change in fluid condition. The source manual specifically identifies sample location as information needed to interpret shifts in properties.[1]
Record the actual location in clear terms. “Active mud” is less useful than a named sampling point that the crew can identify consistently. Include the sampling time and the operation underway. Follow the sampling arrangements specified for the fluid system and operation; do not assume that one location is appropriate for every purpose.
Temperature also needs a clear label. Flowline temperature and the temperature used for a particular laboratory test are different entries. If a report states only “temperature,” the office may not know which condition applies. Preserve the actual test conditions and method identifiers needed to compare the results. The same principle applies to units: a number is incomplete when the unit or measurement basis is ambiguous.

Read mud-property trends with the operations record
A daily mud report should show whether the properties are stable or changing over time. That assessment requires more than checking whether the latest number falls inside a target range. Several small changes across successive reports may reveal a developing issue that is difficult to see in one isolated reading.[1]
Read the test results beside the activity between samples. The manual discusses drilled material, reaming, solids-control performance, surface contamination and exposure to temperature as factors that can affect interpretation. These are prompts for investigation, not a formula that assigns one cause to each property change. A result alone does not establish which factor was responsible.
For example, a higher reported viscosity after a period of reaming should lead the reader to check the sampling basis, the operations record, solids-control observations and recent additions. It should not immediately become a conclusion that the fluid requires one particular chemical treatment. Several explanations may fit the same number, and the report needs the observations that distinguish them.
Record actual measurements even when they differ from the programmed expectations. The source manual warns that a report loses value when pressure to show ideal numbers prevents it from representing the real fluid condition. Explain a deviation and its operational context. Do not quietly replace a measured result with a target value.[1]
For background on the individual measurements, see our guides to drilling-fluid properties and water-based mud testing. This article focuses on interpreting the report rather than repeating those test procedures.

Explain product usage in the daily mud report
A list of bags or drums used tells the reader what left stock, but it does not explain the engineering purpose. Separate material used to build additional fluid volume from material used to change the condition of an existing volume. The source manual makes this distinction central to interpreting daily product consumption.[1]
The remarks should identify the receiving system and the purpose of an addition. A product may have been issued for a reserve tank while the reported properties describe the circulating system. Without that distinction, the reader may incorrectly expect an immediate change in the reported sample. Timing matters as well: a sample collected before an addition cannot demonstrate the result of that addition.
Use consistent inventory units and identify the package size when quantities are recorded as packages. Ten bags is an incomplete mass description if different bag sizes are in use. Keep the stock transaction, the intended treatment and the observed response linked through time, system identification and comments. Do not infer a treatment concentration from stock issues alone.
A simple stock-reconciliation example
The following is an original arithmetic example for a single product and a single inventory unit. It is not a mud-treatment recommendation. Assume the opening stock is 280 bags, 100 bags are received, 75 bags are issued and 20 bags are transferred out or returned to the supplier. The expected closing stock is:
Expected closing stock = opening stock + received − issued − outward transfers and supplier returns
280 + 100 − 75 − 20 = 285 bags.
If the physical count is 283 bags, the count minus expected balance is −2 bags. Record the difference and investigate the stock records and count. This calculation says nothing by itself about the volume of mud lost downhole. Product inventory and fluid-volume accounting are different records.

Keep fluid-volume movements separate
The daily mud report also needs a clear account of where fluid volumes moved. An increase in active-system volume is not necessarily an increase in total fluid on location. Moving existing fluid from reserve to active changes the distribution without creating new fluid. The source manual distinguishes total volume added to the location from changes that apply only to the active system.[1]
Record source, destination, time, quantity and measurement basis for each relevant movement. Separate fluid built or received from transfers, recorded losses and disposals. Preserve the difference between a measured quantity and an estimate. If the report cannot reconcile a movement, identify the uncertainty instead of assigning it to an unsupported loss category.
The manual also distinguishes dilution from replacement of fluid lost by other mechanisms. For example, replacing a base liquid lost through evaporation should be identified for that purpose rather than automatically credited as dilution. The report needs enough context to explain what each addition actually did to the system.[1]
Do not use a daily accounting balance as a substitute for current well monitoring. The report is a record covering a period, and its interpretation depends on the underlying observations and operating discussions. It cannot establish the present well condition from an accounting entry alone.

Write engineering comments that explain the evidence
The comments are where the daily mud report becomes useful to someone who was not beside the tanks when the sample was taken. State the observation, the relevant context, the action actually completed and the next verification. Keep observations separate from proposed explanations. A suspected cause should remain a suspected cause until the available evidence supports it.[1]
For example, this original reporting illustration is more informative than “mud okay”: “The afternoon result differs from the morning sample. Sampling location changed during maintenance, so the two results are not directly comparable. The location change is recorded beside the sample. A repeat from the designated point is required before attributing the difference to the treatment.”
A treatment comment should likewise distinguish completed work from recommendations. “Product issued,” “product mixed” and “response confirmed by a later test” describe different stages. Record the stage reached. If a treatment is planned, state the purpose and the agreed follow-up without describing the intended result as an achieved result.
How to use the free daily mud report template
Download the editable daily mud report template (.xlsx). The workbook contains a blank Daily Report sheet and a Worked Example sheet. It is an original Drilling Manual layout, not a copy of an operator’s or service company’s reporting form.
- Enter the well, reporting period, responsible engineer and fluid system.
- Record the identity and conditions of each sample before entering its measurements.
- Enter applicable units and well-program requirements. Leave unperformed measurements blank and identify nonapplicable fields clearly.
- Record activity, treatments and fluid movements with enough detail to connect them to the samples.
- Complete stock movements in one consistent unit per product. Enter an explicit zero when a confirmed movement did not occur.
- Compare calculated expected stock with the physical count, explain differences and complete the handover comments.
The workbook calculates expected closing product stock and the difference from the physical count. It does not calculate treatment dosages, establish operating limits or infer the cause of a property change. A blank required stock movement leaves its calculated balance blank rather than silently treating missing data as zero. The example sheet shows how the inventory arithmetic works.
Common daily mud report mistakes
| Mistake | Why it matters | Better entry |
|---|---|---|
| Copying yesterday’s sample description without checking it | A changed sample point can invalidate the comparison | Actual location, time and operation for each sample |
| Reporting a result without units or test conditions | The reader cannot establish a comparable measurement basis | Value with its applicable unit and conditions |
| Listing product use without its purpose | New-volume construction and maintenance become mixed together | Product, quantity, destination, timing and purpose |
| Calling every active-system increase new fluid | Transfers can be counted as additions to total inventory | Separate source and destination for each movement |
| Using zero for an unperformed test | Missing information appears to be a measurement | Blank or a clearly identified nonapplicable entry |
| Writing a recommendation as a completed result | The next shift may assume verification already happened | Separate planned action, completed action and observed response |
Daily mud report FAQs
What is the most useful first check?
Confirm the reporting period, fluid system and sample identity. Without these, an otherwise accurate set of numbers may be applied to the wrong operating situation.
Can one daily mud report explain a property change?
It can document the change and its immediate context. Establishing the explanation often requires earlier reports, operating records, treatment details and discussion with the fluid engineer. The source manual emphasizes reading the relationships between these records.[1]
Should the report contain only results inside the programmed range?
No. Record the actual measured results and explain departures from expectations. A report that conceals variation prevents the reader from understanding the fluid condition and evaluating the response.
Does the template replace the operator’s reporting form?
Use the form and reporting requirements specified for the operation. This editable template provides an additional learning and reporting aid. Its fields can be adapted to the required format without importing unverified acceptance limits.
Where should calculations and test procedures be checked?
Use the applicable approved procedures and engineering basis. Our drilling-fluid calculations guide provides related reading. Keep the daily mud report focused on the measured condition, the work completed and the evidence needed for the next decision.
Reference
[1] The ChevronTexaco and BP Drilling Fluid Manual, revision 01/2002, “Drilling Fluid Management,” printed pages 1-18 to 1-22, physical PDF pages 36–40 in the cited edition. Used for the reporting and interpretation principles. All wording, diagrams, the inventory example and the downloadable workbook are original; no source form or source-page image is reproduced.