Oil & Gas Companies E-mails

1-Boeing [email protected] 2- Delmon Oil & Gas [email protected] 3- Akzonobel [email protected] 4- Bureauveritas [email protected] 5- uYOKOGAWA [email protected] 6- ARGAS KSA [email protected] 7- JATCO [email protected] 8- Mobily [email protected] [email protected] 9- Marafiq [email protected] 10- Vinnell [email protected] 11- SADARA [email protected] 12- SATORP [email protected] 13- AYTB [email protected] 14- Safari career@ safari.com.sa 15- Chamber of Commerce [email protected] 16- Arabian Geophysical …

Read more

Bit Dull Grading Steps For TriCone & PDC

As each drill bit is pulled from the hole, we inspect and grade its physical appearance based on the wear it has sustained; this is called Bit Dull Grading. This article explains why we need to do IADC Bit Dull Grading for both PDC drill bits and TriCone Drill Bits. The IADC Bit Dull Grading …

Read more

IADC Roller Cone Bit Classification Codes System

The IADC roller cone drilling bit classification charts are often used to select the best bit for a particular application. These charts contain the bits available from the four leading manufacturers of bits. The bits are classified according to the International Association of Drilling Contractors (IADC) code. The position of each bit in the chart …

Read more

Drill Off Test Procedure For Passive & Active Type

In brief, Drill off test is a simple procedure to run to get the best working combination between weight on bit and Drill Bits RPM which give you the best ROP. Notes To Consider While Running The Test Passive Drill off Test Passive Drill Off Test Procedure: Active Drill off Test An active drill off …

Read more

IADC Code For PDC Bits & Classification Chart

The IADC PDC Drilling Bits Classification Code system, developed by the International Association of Drilling Contractors, has been the representative voice of drillers worldwide since 1940. This system has enabled drillers to exchange information using standard nomenclature and dull grading methods for PDC drill bits and tricones. This system is not as widely used for …

Read more

Operating Parameters For PDC Bits

As it is mentioned in Schlumberger Oilfield Glossary, PDC Bit is a drilling tool that uses polycrystalline diamond compact (PDC) cutters to shear rock with a continuous scraping motion. These cutters are synthetic diamond disks about 1/8 in. thick and about 1/2 to 1 in. in diameter. PDC bits are effective at drilling shale formations, …

Read more

PDC Drill Bits: Design, Cutters, Blades & Hydraulics

PDC drill bit design determines how a fixed-cutter bit shears rock, handles torque and impact, removes cuttings, and maintains hole gauge. A PDC (polycrystalline diamond compact) bit uses synthetic-diamond cutters bonded to hard substrates and mounted on steel or matrix-body blades. Its performance depends on the combined design of cutter size and density, back/side rake, …

Read more

+ More